Skip to main content

set

Overview​

Set host network port

Command Parameters​

-h|--hostname=string      Node ID, Example: host-005056893c9d, Default: enable_hostname_cmd
-n|--nic-name=string      Required parameter, Interface name, Example: eth1
-i|--ip=string            Network port IP, example: 192,168.0.5
-m|--netmask=string       Network port IP mask, example: 255,255.255.0
-g|--gateway=string       Gateway, example: 192,168.0.1
-l|--link-mode=integer    Port speed, enumeration values: 0 (10baseT-HD), 1 (10baseT-FD), 2 (100baseT-HD), 3 (100baseT-FD), 4 (1000baseT-HD), 5 (1000baseT-FD), 15 (2500baseT-FD), 17 (5000baseT-FD), 6 (autonegotiation), 12 (10000baseT-FD), 21 (20000baseMLD2-FD), 22 (20000baseKR2-FD), 23 (40000baseKR4-FD), 24 (40000baseCR4-FD), 25 (40000baseSR4-FD), 26 (40000baseLR4-FD), 31 (25000baseCR-FD), 32 (25000baseKR-FD), 33 (25000baseSR-FD), 34 (50000baseCR2-FD), 35 (50000baseKR2-FD), 36 (100000baseKR4-FD), 37 (100000baseCR4-FD), 38 (100000baseSR4-FD), 39 (100000baseLR4ER4-FD), 40 (50000baseSR4-FD)

Usage Example​

acli network nic set --nic-name eth4 --link-mode 12

Output Example​

task_id: UPID:host-005056b2a30a:00009FD5:3B5A:68F9E5AD:Edit Network Port:64:admin@vtp: